Hyundai IT Car Video System H CMD7082 User Manual

H-CMD7082

DVD/CD/MP3 RECEIVER

DVD/CD/MP3 ɊȿɋɂȼȿɊ

Instruction manual

Ɋɭɤɨɜɨɞɫɬɜɨꢀɩɨꢀɷɤɫɩɥɭɚɬɚɰɢɢ

Important safeguards

Using the device at temperature below -10ºɋ may cause the breakage of the device. BEFORE USING PLEASE

HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!

Read carefully through this manual to familiarize yourself with this high-quality sound system.

Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create

safety hazards such as electrical shock or laser beam exposure.

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes

normal before operating the unit.

DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or

during a thunderstorm.

Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an

unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified

technician check the system.

The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please

confirm it before installation.

Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload

or burn out the power amplifier.

Do not install the detachable panel before connecting the wire.

Installation/Connections

First complete the electrical connections, and then check them for correctness.

Installation opening

This unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.75 ± 5.56

mm thick in order to be able to support the unit.

1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.

Make sure that lock lever

is flush with the mounting collar (not projecting outward).

2. Secure the rear of the unit.

After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber cushion.

3. Insert trim plate.

When you prepare to insert trim plate, please check it¶s direction. Once it was up side down, it cannot be fixed.

IMPORTANT: Remove

these two screws before

installation. Otherwise,

the DVD Player will not

work

Electrical connections

Do not interchange the connection of the wiring!!!

For some car models you may need to modify wiring of the supplied power cord as illustrated (modified wiring), or

else the memory of the unit may be lost after you power off. Contact your authorized car dealer before installing this

unit.

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO

connectors as illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection may cause serious damage to

this unit.

Cut the connector, connect the colored leads of the power cord to the car battery

as shown in the color code table below for speaker and power cable connections.

Location

FUNCTION

Connector A

Connector B

Rear Right(+)---Purple

Rear Right(-)---Purple/Black Stripe

Front Right(+)---Gray

Front Right(-)---Gray/Black Stripe

Front Left(+)---White

Front Left((-)---White/Black Stripe

Rear Left(+)---Green

Rear Left(-)---Green/Black Stripe

Battery 12V (+)/yellow

Auto Antenna/blue

ACC+/red

Ground/black

Panel controls

Front panel

1. PWR button

Press PWR to turn the power on. Press again to turn the power off.

2. VOL knob (rotate it to adjust the volume)/ MENU/SEL button: during VCD/ DVD playback, press more then 2

seconds to display the root menu of the disc. Repeatedly press SEL to select modes: VOL, BAS, TRE, BAL,

FAD; rotate the knob to adjust the level.

3. Remote control sensor

4. LCD display

5. AMS button

Press it to activate the Radio Auto preset function.

button

Press it to open the panel.

7. SD/MMC slot

8. SRC button

Press to select the source: Radio, Disc play, USB, Card.

9. DISP button

10. MUTE button

Press it to cut down the volume output, press it again to resume volume.

11. PLAY/ PAUSE button

Use this button to play or pause playback. Under the pause status, press it to play.

12. INT button

Press it to start intro playing (15 seconds).

13. RPT button

For DVD: use this button to play titles or chapters repeatedly.

For CD/ VCD: use this button to play current track repeatedly.

14. RDM button

Track random play.

15. P/N button

Press it to switch the video system (PAL/ NTSC/AUTO).

16. R/L button

Press it to switch the DVD and VCD audio channel (L/R/ST).

17. PRESET STATION [1-6] buttons

18. AF button

Press it to activate the AF function. Press it for 2 seconds to choose REG ON, press it again for 2 seconds to

switch to REG OFF.

19. PTY button

Press it to activate the PTY function. Press PTY button for 2 seconds to choose LOCAL, press it again for 2

seconds to switch to DX.

20. TA button

Press it to activate the TA function. Press it for 2 seconds to choose ST, press it again for 2 seconds to switch to

MONO.

21. USB slot

22. 8 button

Use this button to search for the beginning of the next track, for forward scanning or for manual seek tuning.

23. BAND button

Press it repeatedly to select your desired radio band (FM1, FM2, FM3, FM (OIRT), AM1, AM2) during

RADIO mode.

24. 7 button

Use this button to search for the beginning of the previous track, for backward scanning or for manual seek

tuning.

Back of the front panel

Press the

button to open the panel and press

to eject the disc.

1. EJECT button

2. RESET hole

3. LED indicator

4. CD slot

5. SD/MMC slot

6. USB slot

Note: Pressing the RESET hole will erase the clock setting and stored stations.

Panel status indicator lights up when you slide the panel down; flashes when you remove the panel.

Remote control

1. ZOOM button

2. TITLE button

3. PWR button

4. Setup button

5. Directional buttons for menu selection

6. ENTER button

7. PROGRAM button

8. Digit area

9. SELECT button (to select basic sound setting options)

10. VOLUME button

11. MUTE button

12. RADIO TUNE/ NEXT

13. Select subtitle language

14. SRC button

, PREVIOUS

button

15. REPEAT button

16. A B button

17. STOP button

18. PLAY/PAUSE button

19. GOTO button

20. MENU PBC button

21. On Screen Display button

22. AUDIO button

23. DISPLAY button

24. ANGLE button

25. BAND button

Battery information of remote controller

1. Press the catch and at the same time pull out the battery tray.

2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing

upward. Insert the battery tray into the remote control.

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a

doctor immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give

off heat, crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat,

crack or start a fire.

Glossary

PBC (PlayBack Control)

PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can

playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback

high definition of still image.

Title

The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to

record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2

and Title 3. You can easy use the functions of looking-for.

Chapter

A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The

chapter contains a unit at least.

Track

It is the biggest component of VCD. Generally, every song of karaoke disc is a track.

Features

Fully compatible

Fully compatible with the most popular discs¶ formats such as DVD, CD, CD-R (containing MP3, JPEG), CD-RW

represented in the market.

Upgrade intelligently

Support the function of upgrading the software for playing discs of new formats to keep up with the market

competition.

Strong output function

The player has an analogue audio output of 2 channels, digital audio output and video output of complex video.

Supports picture CD, Photo CD

Fully compatible with Picture CD and Photo CD without setting additional software. It automatically activates the

media player menu to process.

Screen saver

Supports the screen saver function. If there is no operation or no disc during 5 minutes, the player will automatically

turn into the state of screen saver. It can prolong the serviceability of the player.

Compatible discs

DVD Video

DVD disc include video and audio data. The data can contained by the 12 cm diameter of DVD disc is 7 times of one

can contained by the common CD-R disc. Its maximum continuous playback time can be up to 2 hours (one of

double-sided disc can be up to 4 hours). DVD disc sort as 4 kinds of ones: single-layer and double-layers and

single-sided, single layer and double-sided, double-layers and double-sided disc.

SVCD

Super VCD disc adopt MPEG-II compression way. It can provide better quality of video than VCD disc. And it can

record 2 stereo audio track. Super VCD disc can also supports wide screen.

VCD2.0

Compare with VCD1.1 disc, VCD2.0 disc has a playback list. Generally, Karaoke disc with VCD2.0 format has a

PBC menu.

VCD1.1

Picture CD disc its size is same as audio CD disc include audio and video data. The maximum playback time of the

standard 12 cm of disc with VCD1.1 is 74 minutes.

CDDA

Compatible with CDDA disc. CDDA disc include audio data. The maximum playback time of the standard 12 cm of

CDDA disc is 74 minutes.

MP3/ JPEG

Compatible with CD-R/CD-RW/CD-ROM discs contained files with MP3/ JPG format. Also supports JPG pictures

playback with MP3 tracks as background music, provides fine video and audio effect.

Picture-CD

Compatible with Picture-CD disc. Do not need setting the additional software. Picture-CD is a disc format that stores

photo with electronic file format developed by Kodak company.

Photo-CD

Compatible with Photo-CD disc. Do not need setting the additional soft ware. Photo-CD is a disc format that stores

photo with electronic file format developed by Konica company.

CD-R/CD-RW

Compatible with CD-R/CD-RW disc with ISO9660 specification include the format of MP3, JPG, JPEG, Ac3,

PCM, MPG, MPE, WMA, MP4.

DVD+/-R

Compatible with DVD+/-R disc with UDF specification include the format of MP3, JPG, JPEG, Ac3, PCM, MPG,

MPE, WMA, MP4.