1. precautions
2. Items
3. Setting up the LCD monitor
4. Adjusting The Monitor
5. Appendix
6. PowerSaver
7. Troubleshooting
Plug & Play
The adoption of the new VESA Plug and Play solution eliminates complicated and
time consuming setup. It allows you to install your monitor in a Plug and Play compati-
ble system without the usual hassles and confusion. Your PC system can easily identi-
fy and configure itself for use with your display. This monitor automatically tells the PC
system its Extended Display Identification Data (EDID) using Display Data Channel
(DDC) protocols so the PC system can automatically configure itself to use the flat
panel display.
Precautions
1
Warning
:
The following information will help you avoid the risk of electric shock, serious injury, and death.
Do not allow any object or liq-
uid to enter inside the monitor.
Do not attempt to disassemble,
fix, or modify the monitor.
There is the risk of electric
shock, fire, or damage to the
monitor.
There is the risk of electric
shock or fire.
Plug the power cord into a
properly grounded outlet.
If you hear a noise or smell
smoke from the computer or
adaptor, unplug the power cord
immediately, and call the service
center. There is the risk of elec-
tric shock or fire.
Do not overload an electrical
outlet with too many devices.
There is the risk of electric
shock.
There is the risk of fire.
Caution
:
The following information will help you avoid the risk of minor or moderate injury, or damage to the monitor.
Do not unplug from the outlet
by pulling the power cord or
when your hands are wet.
Do not bend the power cord
Do not use a damaged power
cord or plug. Make sure the
plug fits snugly into the outlet.
Use a proper voltage/current
level indicated
Do not clean the LCD with
abrasive chemicals.
There is the risk of damage to
the LCD.
Do not scratch and damage
the LCD with sharp objects.
excessively or place heavy objects
on it. Keep children and pets away
from the power cord as they may
damage the power cord. There is
the risk of electric shock and fire.
There is the risk of electric
shock and fire.
There is the risk of electric
shock or fire.
Do not expose the monitor to
the direct sun light.
Keep the monitor away from high
temperature, humidity, and dust.
■Operating environment
=0~25degrees Celsius
■Operating environment
=30~80relative humidity.
Do not block the fan louvers.
Keep the monitor away from
objects and electrical appli-
ances that may generate elec-
tromagnetic fields.
Place the monitor on a flat, sta-
ble surface. The monitor may
fall and there is the risk of
damage or injury
Unplug the power cord when
the monitor is not in use for a
prolonged period of time.
There is the risk of fire or dam-
age to the monitor.
1
2
Items
Appendix
2
5
User Manual, LCD Monitor, Power cord, 15-pin D-Sub Signal Cable, Stand, Audio Cable,
DVI-D Cable.
Display Modes
Horizontal
Vertical
Pixel Clock
Sync
Mode
Resolution
Frequency(KHz) Frequency(Hz) Frequency(MHz) Polarity(H/V)
Setting up the LCD monitor
3
720 X 400
31.468
31.468
35.000
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976 *1
70.087
59.940
66.670
75.000
60.300
72.188
75.000
60.004
70.000
75.029
75.000
60.020
75.025 *1
28.322
25.175
30.240
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000 *1
-/+
-/-
How to connect the power cord and the several cables to the LCD monitor.
VGA
SVGA
XGA
640 X 480
-/-
-/-
+/+
+/+
+/+
-/-
800 X 600
1024 X 768
-/-
No.Cable
Name
Power
connections
Power Cord
+/+
+/+
+,-/+,-
+/+ *1
1
2
3
4
5
XGA+
SXGA
1152 X 864
D-SUB
DVI
15-pin D-Sub Signal Cable
DVI-D Cable
Audio Cable*1
External Speaker Cable*1
1280 X 1024
SPK IN
SPK OUT
*1 : For Analog Mode Only.
*1 : For Audio Model Only.
PowerSaver
Adjusting The Monitor
6
4
MENU : 1. First click : The OSD main menu appears.
2. Second click : The OSD menu disappears.
AUTO : When you push Auto button, this will optimize image quality automatically.
MUTE : Sound Mute On/Off button.
This monitor has a built-in power management system called PowerSaver.
This system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time.
POWER: Power On/Off toggle button.
Power
Recovery
Time
SEL
: Select a command function.
State
LED Color
consumption
: 1. Move the on-screen highlighted command item to the next one.
2. Decrease the current option value.
ON
Under 40W
Green
Amber
-
: 1. Move the on-screen highlighted command item to the Previous one.
2. Increase the current option value.
OFF
Less than 2W
Within2 sec
MODE : You can change the display mode.(ANALOG DIGITAL)
VOL : Volume.
MWE : You can manually adjust the screen to your environment on the computer.
3
4
|