Hyundai IT DVD Player H CMD7078 User Manual

H- CMD7078

DVD/CD/MP3-RECEIVER

DVD/CD/MP3-ɊȿɋɂȼȿɊ

Instruction manual

Ɋɭɤɨɜɨɞɫɬɜɨꢀɩɨꢀɷɤɫɩɥɭɚɬɚɰɢɢ

Important safeguards

Using the device at temperature below -10ºɋ may cause the breakage of the device. BEFORE USING PLEASE

HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!

Read carefully through this manual to familiarize yourself with this high-quality sound system.

Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher

amperage rating may cause serious damage to the unit.

DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create

safety hazards such as electrical shock or laser beam exposure.

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes

normal before operating the unit.

DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or

during a thunderstorm.

Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an

unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified

technician check the system.

The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm

it before installation.

Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or

burn out the power amplifier.

Do not install the detachable panel before connecting the wire.

Installation/Connections

First complete the electrical connections, and then check them for correctness.

Installation opening

This unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.75 ± 5.56

mm thick in order to be able to support the unit.

1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.

Make sure that lock lever

is flush with the mounting collar (not projecting outward).

2. Secure the rear of the unit.

After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber cushion.

3. Insert trim plate.

When you prepare to insert trim plate, please check it¶s direction. Once it was up side down, it cannot be fixed.

IMPORTANT: Remove

these two screws before

installation. Otherwise,

the DVD Player will not

work

Electrical connections

Do not interchange the connection of the wiring!!!

For some car models you may need to modify wiring of the supplied power cord as illustrated (modified wiring), or

else the memory of the unit may be lost after you power off. Contact your authorized car dealer before installing this

unit.

Using the ISO Connector

1. If your car is equipped with the ISO connector, then connect the ISO

connectors as illustrated.

2. For connections without the ISO connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection may cause serious damage to

this unit.

Cut the connector, connect the colored leads of the power cord to the car battery

as shown in the color code table below for speaker and power cable connections.

Location

FUNCTION

Connector A

Connector B

Rear Right(+)---Purple

Rear Right(-)---Purple/Black Stripe

Front Right(+)---Gray

Front Right(-)---Gray/Black Stripe

Front Left(+)---White

Front Left((-)---White/Black Stripe

Rear Left(+)---Green

Rear Left(-)---Green/Black Stripe

Battery 12V (+)/yellow

Auto Antenna/blue

ACC+/red

Ground/black

Panel controls

Front panel

1. MUTE button

Press it to cut down the volume output, press it again to resume volume.

2. PWR button

Press PWR to turn the power on. Press again to turn the power off.

3. BAND button

Press it repeatedly to select your desired radio band (FM1, FM2, FM3, FM (OIRT), AM1, AM2) during

RADIO mode.

4. NEXT

/ PREVIOUS

buttons

Use these buttons to search for the beginnings of the next/ previous tracks or manual seek tuning.

5. AF button

Press it to activate the AF function. Press it for 2 seconds to choose REG ON, press it again for 2 seconds to

switch to REG OFF.

6. TA button

Press it to activate the TA function. Press it for 2 seconds to choose ST, press it again for 2 seconds to switch to

MONO.

7. PTY button

Press it to activate the PTY function. Press PTY button for 2 seconds to choose LOCAL, press it again for 2

seconds to switch to DX.

button

Press it to open the panel.

9. SD/ MMC card socket

10. LCD display

11. USB socket

12. R/L button

Press it to switch the DVD and VCD audio channel (L/R/ST).

13. P/N button

Press it to switch the video system (PAL/ NTSC/AUTO).

14. RDM button

Track random play.

15. RPT button

For DVD: use this button to play titles or chapters repeatedly.

For CD/ VCD: use this button to play current track repeatedly.

16. INT button

Press it to start intro playing (15 seconds).

17. PLAY/ PAUSE button

Use this button to play or pause playback. Under the pause status, press it to play.

18. PRESET STATION [1-6] buttons

19. VOL knob (rotate it to adjust the volume)/

MENU/SEL button (during VCD/ DVD playback, press more then 2 seconds to display the root menu of the

disc. Repeatedly press SEL to select modes: VOL, BAS, TRE, BAL, FAD; rotate the knob to adjust the level).

20. AMS button

Press it to activate the Radio Auto preset function.

21. SRC button

Press to select the source: Radio, Disc play, USB, Card.

22. DISP button

Press it to switch the display on or off.

Back of the front panel

Press the

button to open the panel and press

to eject the disc.

Disc eject Disc slot: insert a disc for playback here

SD/ MMC card jack

USB jack

Reset hole

Panel status indicator

Note: Pressing the RESET hole will erase the clock setting and stored stations.

Panel status indicator lights up when you slide the panel down; flashes when you remove the panel.

Remote control

1. ZOOM button

2. TITLE button

3. PWR button

4. Setup button

5. Directional buttons for menu selection

6. ENTER button

7. PROGRAM button

8. Digit area

9. SELECT button (to select basic sound setting options)

10. VOLUME button

11. MUTE button

12. RADIO TUNE/ NEXT

13. Select subtitle language

14. SRC button

, PREVIOUS

button

15. REPEAT button

16. A B button

17. STOP button

18. PLAY/PAUSE button

19. GOTO button

20. MENU PBC button

21. On Screen Display button

22. AUDIO button

23. DISPLAY button

24. ANGLE button

25. BAND button

Battery information of remote controller

1. Press the catch and at the same time pull out the battery tray.

2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing

upward. Insert the battery tray into the remote control.

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a

doctor immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give

off heat, crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat,

crack or start a fire.

Glossary

PBC (PlayBack Control)

PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can

playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback

high definition of still image.

Title

The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to

record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title 2

and Title 3. You can easy use the functions of looking-for.

Chapter

A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter. The

chapter contains a unit at least.

Track

It is the biggest component of VCD. Generally, every song of karaoke disc is a track.

Features

Fully compatible

Fully compatible with the most popular discs¶ formats such as DVD, CD, CD-R (containing MP3, JPEG), CD-RW

represented in the market.

Upgrade intelligently

Support the function of upgrading the software for playing discs of new formats to keep up with the market

competition.

Strong output function

The player has an analogue audio output of 2 channels, digital audio output and video output of complex video.

Supports picture CD, Photo CD

Fully compatible with Picture CD and Photo CD without setting additional software. It automatically activates the

media player menu to process.

Screen saver

Supports the screen saver function. If there is no operation or no disc during 5 minutes, the player will automatically

turn into the state of screen saver. It can prolong the serviceability of the player.

Compatible discs

DVD Video

DVD disc include video and audio data. The data can contained by the 12 cm diameter of DVD disc is 7 times of one

can contained by the common CD-R disc. Its maximum continuous playback time can be up to 2 hours (one of

double-sided disc can be up to 4 hours). DVD disc sort as 4 kinds of ones: single-layer and double-layers and

single-sided, single layer and double-sided, double-layers and double-sided disc.

SVCD

Super VCD disc adopt MPEG-II compression way. It can provide better quality of video than VCD disc. And it can

record 2 stereo audio track. Super VCD disc can also supports wide screen.

VCD2.0

Compare with VCD1.1 disc, VCD2.0 disc has a playback list. Generally, Karaoke disc with VCD2.0 format has a

PBC menu.

VCD1.1

Picture CD disc its size is same as audio CD disc include audio and video data. The maximum playback time of the

standard 12 cm of disc with VCD1.1 is 74 minutes.

CD-DA

Compatible with CD-DA disc. CD-DA disc include audio data. The maximum playback time of the standard 12 cm

of CD-DA disc is 74 minutes.

MP3/ JPEG

Compatible with CD-R/CD-RW/CD-ROM discs contained files with MP3/ JPG format. Also supports JPG pictures

playback with MP3 tracks as background music, provides fine video and audio effect.

Picture-CD

Compatible with Picture-CD disc. Do not need setting the additional software. Picture-CD is a disc format that stores

photo with electronic file format developed by Kodak company.

Photo-CD

Compatible with Photo-CD disc. Do not need setting the additional soft ware. Photo-CD is a disc format that stores

photo with electronic file format developed by Konica company.

CD-R/CD-RW

Compatible with CD-R/CD-RW disc with ISO9660 specification include the format of MP3, JPG, JPEG, Ac3,

PCM, MPG, MPE, WMA, MP4.

DVD+/-R

Compatible with DVD+/-R disc with UDF specification include the format of MP3, JPG, JPEG, Ac3, PCM, MPG,

MPE, WMA, MP4.

General operation

Power on/ off

Press PWR button on the front panel or RC to turn the unit on.

Press again to switch the set to turn the unit off. When you switch off the system or car ignition, the settings, tuner

presets and the volume level will be retained in the unit¶s memory.

Source select

Press SRC button once or more to select your desired function: DISC, Tuner (Radio), USB, Card.

Note: the USB and Card items will be available if the USB or SD/ MMC card is in.

If you select Radio mode, press BAND once or more to select FM1, FM2, FM3, FM (OIRT), AM1, AM2.

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press

button on the panel to open the panel and press the RESET hole with a point object to restore the unit to

the original factory settings.

Volume knob functions

Push the VOL knob to select VOL/BAS/TRE/BAL/FAD, rotate the control to adjust.

VOLUME control

Display shows the volume level VOL and number from 0 to 63.

BASS control (will be available when DSP is OFF)

Display shows the BASS level.

TREBLE control (will be available when DSP is OFF)

Display shows the TREBLE level.

BALANCE control

Display shows the BALANCE level.

FADER control

Display shows the FADER level.

Push the knob for more then 2 seconds to enter the menu and select the mode:

TA VOL mode: rotate the knob to adjust the TA volume.

EQ mode: rotate the knob to select EQ sound effect: ROCK, POP, CLASSIC, FLAT, EQ OFF.

LOUD mode: rotate the knob to choose the loud ON or OFF.

BEEP mode: rotate the knob to choose the beep sound ON or OFF.

12/24 hours mode: rotate the knob to choose the 12 or 24 hours mode.

TA seek mode: rotate the knob to choose TA ALARM or TA SEEK mode.

If the TA (Traffic Announcements) is turned on and there is no traffic program identification code received in the

specified time, no TA/TP will display and either TA ALARM or TA SEEK will be activated.

TA ALARM mode: alarm is turned on.

TA SEEK mode: TA SEEK is automatically activated.

RETUNE mode: to determine the initial time of automatic TA search.

There are 2 modes: RETUNE L and RETUNE L.

RETUNE L: 180 seconds.

RETUNE S: 45 seconds.

Note: Retune mode is active for TA SEEK mode only.

VOL LAST/ ADJUST mode: press the knob to choose VOL LAST, the turn-on volume level is the volume level of

latest power off. Rotate knob to choose VOL ADJ, then rotate the knob to set the turn-on volume level.

COLOUR 1/2 mode: rotate the knob to choose key LED color: RED or GREEN.

Turning the sound off

Press the MUTE button to turn the sound off. Press it again or use the VOLUME buttons to turn the sound on.

Adjusting clock

Displaying time: Press DISP button to display the current time on the LCD, it returns to original in 5 seconds.

Setting time: Press DISP again for more than2 seconds to select the hour setting. Rotate the knob to set the

hours. Press the knob to make the minute start blinking. Rotate the knob to set the minutes.

Press DISP again to exit the clock setting.

Note: After receiving a station, if the current time is not the same as the RDS¶ (Radio Data System), the time of RDS

will adjust to the current.

Digital tuner

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not

available in you area, the following service is not available, either.

Band selection

Press PWR to turn the power on, then press the SRC button once or more to select TUNER.

Press BAND button once or more to select: FM1, FM2, FM3, FM (OIRT), AM1, AM2 (for 2 bands).

Manual/ automatic tuning

Manual tuning: press the

automatically tunes to a station of sufficient reception.

Automatic tuning: Press and hold the

the station.

buttons repeatedly to select a station downward or upward, the radio

buttons, the automatic search will start. It will play when finds

Programming tuner stations

You can store up to a total of 36 radio stations in the memory (24 FM [18 FM + 6 FM (OIRT)], 12 AM), manually or

automatically.

To store a station:

Select a band (if needed)

Select a station by

Hold a Preset button (1-6) which you want store the station for at least 2 seconds.

buttons

To recall a station:

Select a band (if needed)

Press a Preset button (1-6) briefly to recall the stored station

OR:

During radio mode press the

buttons to select upward or downward stored stations.

AMS function (Auto Memory Store)

Preset scan: press AMS button for less than 1 second to scan all preset stations in the memory of the current

band and stay on each memory stations for about 5 seconds. To stop preset scan, press AMS button again.

Auto memory store: press AMS button for more than 2 seconds to enter auto store mode. The radio will

automatically store 6 strongest stations to the 6 preset memories of the current band. To stop auto store, press

AMS button again.